Open/Download Technical document
This solution's been developed for multi functional sport facilities and for sports activities
requiring ball rebound, elasticity and deformation to impacts. All the several references
both in Italy and abroad are evidence of the great reliability of this system.
This model was developed in case the floor requires more stress capacity; we created a
double spring layer structure to offer a higher level surface. This model is tested according
the new standards set by EN 14904 and therefore certified for fire reaction and approved by
FIBA, like all our products.
Brief Technical Description:
Sports floor consisting of continuous double layer made of plywood plates, settled on elastic
mattress - top layer made of solid parquet elements, 22 mm thickness, pre-lacquered.
Total thickness 61 mm.
Techical Description:
The main steps of making the sports floor model SONDRIO 2 are the following:
• Laying of polythylene sheet, 0,20 mm thickness, as anti-steam barrier on the concrete;
• Laying of PUR mattress, at right angle to the parquet elements,15 mm thickness, to
make the floor uniformly flexible;
• Laying of the bottom spring layer consisting of continuous plywood plates, 12 mm thickness
parallel to the parquet elements, and fixing of the plates to each other with staples;
• Laying of the upper layer consisting of continuous plywood plates, 12 mm thickness, at right
angle to the parquet elements, and fixing of the plates with staples (to each other and to the
bottom spring layer);
• Installation of the solid parquet elements 22 mm thickness (HEVEA RUBBER WOOD),
onto the plywood plates, fixing with specific T-nails;
• Marking of basketball and volleyball courts with lines according the current regulations;
• If requested, installation of skirting board made of wood, with specific grooves for ventilation
and connection to the existing floor with steel, aluminum or wooden thresholds.
Certifications:
EN 14904 Certification
EN 13501 Fire Resistance Certificate
Product data sheet